What happens during a Portland home inspection?

by Nathan Stancil

What your inspector can see, when to call a specialist, and what to do with the report before your deadline.

You’ve got an accepted offer. Start with the inspection deadline in your contract and work backward. Leave room for the visit, the written report and any follow-up that could change your decision. If the house is on septic or there’s a question about an old oil tank, I’d make those calls when you book the general inspection.

What the inspector looks at

A general inspection is a visual look at the house and the systems the inspector can safely access: roof and drainage, visible structure, attic or crawlspace where accessible, plumbing, electrical, heating and cooling. Ask what’s included, and check the inspector’s certification and the company’s license through the Oregon Construction Contractors Board.

A wet crawlspace or steep roof may limit what the inspector can see. They won’t open walls to find the source of a stain, and you shouldn’t assume the buried sewer line, septic system or well is included. The state’s home inspection guide explains the scope. If you can attend the walkthrough, ask the inspector to point out any areas they couldn’t reach and explain what remains unknown.

When to book a separate check

Public sewer: A scope sends a camera down the private line to look for roots, breaks and other problems. If you need to know where the pipe runs or whether it may be shared, ask for a locate too. A pipe can look sound and still cross a neighbor’s parcel. For a suspected nonconforming connection, Portland Environmental Services advises getting the video, written findings, a route drawing and an assessment of how and where the line connects.

Septic: Book a separate evaluation if the home isn’t on public sewer. Ask for permit and maintenance records, and ask the specialist what they could verify about the tank and drainfield. A pumping receipt tells you when the tank was serviced, not how the system is performing. Oregon DEQ’s septic guidance is a useful starting point.

Domestic well: When Oregon’s sale requirements apply, the seller tests for arsenic, nitrate and total coliform bacteria. Ask separately about the well’s yield, equipment and condition. Oregon explains the testing requirements and exceptions.

Radon and old heating oil: These are separate checks. The Oregon Health Authority recommends radon testing. Leave enough time for the results. If you have reason to suspect past oil heat, check Oregon DEQ’s tank records. No record doesn’t rule out a tank. If you still have a question, DEQ recommends a qualified specialist and getting the owner’s permission before any search.

Structure or water: If the report flags possible movement or persistent moisture, ask what evidence the inspector saw. A structural engineer can evaluate suspected movement. A drainage or roofing contractor may be a better first call for a leak, depending on where the water is coming in.

What to do with the report

I’d put active leaks, safety concerns and expensive unknowns ahead of a long list of routine maintenance. Get a written scope and estimate for the issues that could change what you’re willing to pay or whether you still want the house. If the follow-up can’t happen in time, ask your agent whether the parties can agree in writing to an extension in the way your contract requires. Simply asking does not extend the deadline. Your signed agreement controls your options and notice requirements.

Before the deadline: confirm what notice your contract requires; check what was inspected and what wasn’t; get answers on the items that could change your decision; decide what you can live with, what you’d negotiate and what would make you walk away.

Ask Nathan about a Portland-area home you’re considering.

Keep exploring

Check a Portland remodel permit and research an ADU before counting on rent.